Replace the display bezel. I You have read the safety information that shipped with your computer. See Replacing the Display Assembly. Before Working I nside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to ensure your own personal safety. Lift the power button board along with its cable away from the palm rest. Do not remove the hard drive while the computer is On or in Sleep state.

Uploader: Kirr
Date Added: 7 February 2018
File Size: 63.28 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 75908
Price: Free* [*Free Regsitration Required]

Enter the service tag. Peel and lift the tape that secures the display cable to the display-board connector and disconnect the display cable. Route the display cable and Mini-Card antenna cables through the routing guides on the display hinges.

Slide the connectors on the USB board into the slots on the computer base and align the screw hole on USB board with the screw hole on the computer base.

Forum of Dell Inspiron Vam dell inspiron n This one is tough and is durable. Do not remove the hard drive while the computer is On or in Sleep state. Hold a component such as a processor by its edges, not by its pins. If you do not hear the click, remove the memory module and reinstall it. Remove the six screws that secure the display panel to the display cover.


See Removing the Battery.

Turn the computer top-side up, open the display, and press the power button to ground the system board. Use the alignment posts on the display cover to place the camera module in position and snap the camera module into place. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the module pops up.

Removing the Coin-Cell Battery 1.

Press down on the connector latch to secure the keyboard cable to the connector on the system board. Press down on the connector latch to secure the USB-board cable to the connector on czm system board. Place the hard-drive bracket on the hard drive.

Align the screw holes on the display panel with the screw holes on the display cover and replace the six screws. Slide the coin-cell battery into the battery socket on the computer base.

See Removing the Mini-Card. To avoid damaging the computer, perform the following steps before you begin working inside the computer. Removing the Camera Module 1. To help prevent damage to the system board, remove the main battery, see Removing the Batterybefore working inside the computer. Handle components and cards by their edges, and avoid touching pins and contacts. When removing the processor module, pull the module straight up. In order to use this website and its services, users must consent to and abide by the Terms of Use.


Replace the two screws that secure the system board to the computer base.

Dell Inspiron 14 N4050 14″ Celeron Dual Core Laptop

Connect the display cable, speakers cable, audio-board cable, USB-board cable, coin-cell battery cable, and AC-adapter cable to the connectors on the system board. Make a note of the display cable and Mini-Card antenna cables routing and remove the cables from the routing guides. Turn off your computer, see Turning Off Your Computerand all attached devices.

Replace the thermal cooling assembly. Replace the screw that secures the power button board to the palm rest.

To continue using , please upgrade your browser.

Top5 Dell Laptops 1. Align the four captive screws on the thermal cooling assembly with the screw holes on the system board and tighten the screws in sequential order indicated on the thermal cooling assembly. Core i3, Core i5, Pentium