We do it by adding the The drop list might scroll, so it may not be obvious that it’s at the bottom of the list. Note that you may want to increase the time value for “Timeout when converting? Since it pops up the dialog box asking where to send the FAX job locally, this would be ugly, at best. The values you’ll want to enter are: Plug in your modems and Run:

Uploader: Daira
Date Added: 22 June 2006
File Size: 70.61 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45681
Price: Free* [*Free Regsitration Required]

Next, you’ll be asked what port to use.

First, you’ll want to create an appropriate PostScript printer using the “Add Printer” button. FaxDispatch FaxDispatch is a custom script that one can create for Hylafax to specify nonstandard delivery options.

You can list your pci cards by doing the following. You install it Gfax by: You can also remove multiple faxes at ;rint, like the following: Add this to your config.

Automatically print incoming faxes

Otherwise, answer yesand perform the above faxaddmodem related steps again. And a folder where the faxes are. You can do it by: The extension it should use.


hyladax The FAX number is completely unedited and unverified. We do it by adding the For some reason busy signal gets labeled as no carrier detected.

Automatically print incoming faxes –

If you are only configuring one fax-modem, answer no when asked if you want to configure another modem. If you connect more modems or when you buy a serial pci card you will want to know which ttyS port they are using. The driver found the fourth port on the card, but couldn’t use it because all four ports ttyS0-ttyS3 were already in use that’s what the “” error means. The maximum number of the serial ports you can set the kernel boot to is 16,if you need more, kernel 2. HylaFax last modified If you are not allowing local network users to use this fax server, you can skip this section.

And to enable enough time for it to send we can issue this command which will use ttyS0 modem and will expire in 24 hours. Assuming there were no errors, you will see a menu like the following: This will show you all pci cards.


FaxDispatch file – routes all inbound faxes to myemail emailaddy. Bus Device Press Enter to accept them. Under Debian Squeeze this is plug-and-play.

Adding a Dial Prefix To configure HylaFax to dial a number and pause before dialing the requested number, use your favorite text editor to add the following line to your config.

You will then be asked for values specific to the modem. Examine possible remedies in the Common Errors Section. Likewise, if your using a network containing addresses in the bylafax Note that you may want to increase the time value for “Timeout when converting? You can just press Enter to accept the default values.

It relies on HylaFAX’s dialing rules to make sense of it. Everything External, check the position of prunt switch 2. You have a HylaFAX scheduler process running.